Home › Fence Staining and Sealing
Our fence staining and sealing service in High Point, NC protects your wood fence from weather, fading, and rot. We clean, prep, and apply premium stains or clear sealers that enhance the natural beauty of the wood. Extend the life of your fence and keep it looking fresh with professional maintenance.
Legendary Fence Company High Point provides professional fence staining throughout High Point, NC, North Carolina and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 336-920-7309 or request your free quote.
Protecting Your Fence in High Point’s Weather
In High Point, NC, fences take a beating from hot sun, sudden thunderstorms, humidity, and winter freezes. Without proper fence staining and sealing, wood can fade, crack, warp, and grow mildew much sooner than it should. At Legendary Fence Company High Point, we focus on stain and seal work that is tailored to the specific weather patterns here in the Piedmont Triad.
Our goal with every fence staining project is simple: make your fence last longer and look better while cutting down on the maintenance you have to do every year. A good stain and sealer helps block UV rays that bleach the wood, sheds water so boards do not stay wet, and creates a smoother surface that resists mold growth and splintering.
High Point’s humid summers and frequent rain mean unprotected fences often show gray discoloration and surface mildew within a couple of years. We plan stain schedules around this reality. For example, we usually recommend staining new fences after the wood has had a few months to dry, then re-coating every 3 to 5 years, depending on color and product type.
Legendary Fence Company High Point can work on both newly installed and older fences. For newer fences, we focus on timing and product choice so you do not seal in excess moisture. For older fences, we spend more time on prep, cleaning, and repairs to make sure the new stain actually bonds and performs the way it should in our local climate.
How Our Fence Staining & Sealing Process Works
Fence staining is not just about brushing on color. The quality of the preparation and the way the stain is applied matter just as much as the product you choose. Here is how Legendary Fence Company High Point typically handles a fence staining and sealing job.
First, we inspect your fence. We look for loose boards, popped nails, rot at the bottom of posts, and any warped pickets. Minor repairs, such as re-securing fasteners or replacing a few damaged boards, are usually taken care of before staining so the finish is consistent and durable.
Second, we clean the wood. For most fences we use a specialized wood cleaner and a light pressure wash. The goal is to remove dirt, mildew, and any old failing stain without chewing up the surface. In High Point, mildew can be a big issue, especially on fences shaded by trees or near irrigation, so we treat those areas carefully to kill organic growth.
Third, the fence dries. This step is critical in our humid environment. Depending on weather, we typically allow 24 to 48 hours of dry time after washing. Rushing this step is one of the most common mistakes homeowners make because stain will not properly soak into damp wood.
Fourth, we apply the stain and sealer. We usually use a combination of spraying for even coverage and back-brushing to work the stain deeper into the grain. This helps avoid lap marks and missed spots between pickets. Product choice, whether semi-transparent or solid, affects how many coats we apply and how long each section takes.
Finally, we walk the fence with you. Once the stain has set up, we inspect for light spots, drips, or any areas that soaked up more product than others. Small touchups are done on the spot so you are not discovering thin coverage a month later.
Choosing the Right Stain for Your Fence
There is no single stain that is right for every fence in High Point. The best option depends on the wood species, the age of the fence, how much grain you want to see, and how much maintenance you are comfortable with. Legendary Fence Company High Point helps you choose a product and color based on your priorities, not just what is on sale at the store.
Semi-transparent stains are popular for pine and cedar because they show off the wood grain while still giving strong UV and water protection. They are a great fit if you like a natural look, especially in neighborhoods with a lot of mature trees. In our sun and humidity, these typically last about 3 to 4 years before a maintenance coat is needed.
Semi-solid and solid stains provide more color and more UV shielding. They are a smart choice if your fence is older, has uneven coloring, or has been previously stained multiple times. Solid stains can also help refresh a weathered fence that you do not want to replace yet by hiding old discoloration while sealing the surface.
Color matters too. Darker tones absorb more heat, which can accelerate drying and checking on some fences, especially those that get full afternoon sun in High Point summers. Lighter browns and natural wood tones tend to stay cooler and usually show fading less dramatically over time.
We also consider your landscaping and home exterior. For example, a warm cedar tone might complement a brick home on Skeet Club Road, while a cooler gray-brown might look better with newer siding in growing neighborhoods near NC-68. We bring stain samples to your property and test small sections so you can see how the color looks in your actual sunlight before we do the full job.
What Affects Cost and Timeline for Fence Staining
Every fence staining project is a little different, so we always provide a clear, written estimate after seeing your fence in person. Legendary Fence Company High Point breaks down the factors that influence cost so you know what you are paying for and where you can save.
The size and design of your fence are the starting points. A tall privacy fence that needs staining on both sides takes more product and labor than a shorter picket fence with wide gaps. Corner lots, fences with lots of jogs or angles, and tight areas behind sheds or HVAC units can also increase labor time because access is more difficult.
Condition of the existing fence is another major factor. A relatively clean, newer fence may only need light washing before staining. An older fence covered in mildew or with peeling old finish will require more intensive cleaning and sometimes stripping. That extra preparation time increases the cost but is necessary if you want the new stain to last.
Product choice matters too. Higher quality, contractor-grade stains and sealers typically cost more upfront but usually provide longer protection, which can reduce how often you need to re-stain. We are honest about the tradeoff so you can decide whether you prefer a budget-friendly solution or a longer-lasting premium system.
Season and weather also affect scheduling. In High Point, the best windows for fence staining are typically spring and fall, when temperatures are moderate and humidity is reasonable. Summer projects are still very doable, but we often start earlier in the morning to avoid direct midday sun that can cause stain to dry too quickly. If rain is in the forecast, we will discuss whether to reschedule to avoid wash-off or spotting.
What High Point Homeowners Should Know Before Hiring
Before you hire anyone for fence staining, it helps to know a few key points so you get the results you expect. At Legendary Fence Company High Point, we encourage customers to ask questions and understand the process.
First, ask what products will be used and whether they are suitable for our climate. Some bargain stains do not handle High Point’s combination of UV and humidity very well and may start peeling instead of gently fading. We typically recommend penetrating, oil based or high quality water based products that soak into the wood rather than just forming a film on top.
Second, discuss preparation in detail. A quote that skips washing or only includes a quick rinse is usually a red flag. Proper cleaning and dry time are critical, especially in shady or low airflow spots where moisture lingers. You should know exactly how your contractor plans to handle mildew, dirt, and any previous coatings.
Third, talk about surrounding areas. Stain overspray can affect siding, concrete, plants, and neighbor property if not controlled. We protect nearby surfaces with plastic, tarps, and shields, and we use controlled spray patterns and back brushing to keep stain where it belongs.
Finally, clarify maintenance expectations. A good contractor will tell you roughly how long your fence staining should last in real High Point conditions and what signs to watch for when it is time for a fresh coat. We usually recommend a quick yearly inspection, especially along the bottom of the boards and on the sunniest sides of your yard.
When you work with Legendary Fence Company High Point, you get a team that installs fences and also understands how to protect them for the long term. That combination means we look at your fence as a system, not just a surface to color, so you get more years of use and better curb appeal from the investment you already made.
