Commercial Chain Link Fences in High Point, NC

Our commercial chain link fences in High Point, NC provide strong, cost effective perimeter security for businesses and facilities. We install standard, tall, and high security chain link systems with options like barbed wire, razor wire, and privacy slats. Protect equipment, vehicles, and inventory with a durable, low maintenance fence.

Legendary Fence Company High Point provides professional commercial chain link fence throughout High Point, NC, North Carolina and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 336-920-7309 or request your free quote.

Commercial chain link fencing built for High Point businesses

When local businesses call Legendary Fence Company High Point for a commercial chain link fence, they are usually focused on security, visibility, and durability. We design and install systems that match your actual site conditions, not a one-size-fits-all layout from a catalog. That means we look at traffic flow, property lines, drainage, and where people or vehicles actually enter your property before we ever set a post.

Most High Point commercial clients choose chain link because it is cost effective, fast to install, and easy to modify later as the property changes. You can expand it, add gates, upgrade to privacy slats, or integrate access control without tearing everything out. We work with factories, warehouses, trucking yards, small shops, municipal sites, schools, and multi-family buildings throughout High Point, Jamestown, and the surrounding area.

From the first walk-through, we talk in plain terms about what you need the fence to do. That might be securing a loading dock after hours, keeping equipment yards locked down, defining a property boundary, or separating public and employee parking areas. The design and hardware we recommend for a quiet office lot are not the same as what we put on a high-traffic distribution yard, and we explain those differences so you know exactly what you are buying.

How our commercial chain link fence installations work

Legendary Fence Company High Point follows a clear, step-by-step process so you know what will happen on your site.

1. Site review and measurement: We meet on-site to walk the property with you, confirm fence lines, mark gate locations, discuss local access needs, and identify problem areas like tight corners, slopes, or utility lines. In High Point, many older industrial properties have unclear or mismatched property markers, so when needed we coordinate with your surveyor or use existing pins and plats to avoid encroachment issues.

2. Layout and marking: Before digging, we mark post locations with paint and flags, call 811 to have underground utilities located, and adjust the layout to avoid gas, water, or communication lines. This is especially important in parking lots and around docks where underground utilities are common.

3. Post installation: We core drill or auger post holes to the depth required for commercial use, usually deeper and wider than residential. Holes are bell-shaped where needed for added stability. We set galvanized steel posts in concrete, align them carefully, and brace terminal (end, corner, and gate) posts to handle tension and gate weight.

4. Framework and fittings: Once the concrete cures, we install top rails, bottom rails or tension wire, line post caps, brace bands, and tension bands. This framework is what determines how well the fence holds up to daily use and wind, so we use commercial-grade hardware instead of light-duty residential components.

5. Chain link fabric and tensioning: We stretch the chain link fabric using proper tension tools, then tie it to the rails and posts with the correct spacing of aluminum or galvanized ties. We eliminate slack and sagging, which is one of the most common problems we see on poorly built fences.

6. Gates and access hardware: Last, we hang and align gates, install commercial hinges, latches, drop rods, and optional panic hardware or gate operators. We test swing and clearance with your actual vehicles or equipment when possible, so drivers and staff do not fight with the fence once we leave.

Material and design options for commercial chain link fences

Commercial chain link fence is more customizable than many business owners realize. Legendary Fence Company High Point helps you choose materials that match your security level, appearance goals, and budget.

Height and mesh size: For basic perimeter control, 6 foot tall fence with 2 inch mesh is standard. For higher security areas, we often install 8 foot or higher fence with smaller mesh size that is harder to climb or cut. Around sports facilities and some industrial yards we may go taller to catch balls or debris.

Galvanized vs vinyl coated: Bare galvanized chain link is the workhorse option, very durable and cost effective. Vinyl coated chain link (typically black or green) improves appearance, blends into landscaping, and adds a layer of corrosion resistance. In retail centers and office parks around High Point, many owners prefer black vinyl coated fences because they look cleaner and more professional.

Posts and rails: For heavy commercial use, we size posts and rails larger and thicker than residential. Corner and gate posts are upsized further, especially for wide truck gates. In high-traffic gate locations we often recommend schedule 40 or heavier posts to prevent leaning and damage from occasional bumps.

Privacy and screening: You can add privacy slats, windscreen fabric, or custom branded screens to a commercial chain link fence. Slats are good for long-term privacy around equipment yards or dumpsters. Windscreen fabric is common around construction sites, sports courts, and storage areas. We advise on how screening will affect wind load so the fence is built to handle it.

Security features: Options include barbed wire or razor wire on extension arms, bottom rail or tension wire to reduce gaps, internal panic bars on gates, mag locks, and integration with card readers or keypad entry. We coordinate with your security contractor when needed so cameras and access controls match the fence layout.

Local conditions, timing, and permitting in High Point

High Point weather and soil conditions affect how commercial chain link fences should be built. Legendary Fence Company High Point factors these local realities into every project so your fence lasts.

Soil and drainage: Around older industrial parks and warehouse districts, soils can be a mix of red clay and fill material. Clay holds water and can heave if posts are not set deep enough or if concrete is not properly belled. On sloped lots, we design step-down sections or grade-following fences so there are no large gaps that invite intrusion or animal entry.

Weather: In the Piedmont, we see summer storms with strong gusts and occasional winter rain and freeze-thaw cycles. Lightweight posts or shallow holes shorten fence life under these conditions. When you add privacy slats or windscreens, wind load increases significantly, so we upgrade post size, footing size, and bracing to prevent leaning or collapse.

Scheduling: In High Point, the best times to schedule new commercial chain link fence installations are typically fall and early spring. The ground is easier to work than in the winter freeze and we avoid some of the heavy summer thunderstorm pattern. That said, we work year-round and can manage winter work as long as concrete can cure properly.

Permits and codes: Commercial properties often have zoning or code requirements related to height, setbacks, and sight triangles near driveways or intersections. For projects inside High Point city limits or Guilford County, we help you understand what is allowed before you commit to a layout. For sites with fire access routes, we coordinate gate widths and lock types with your fire marshal or property manager so emergency access is not blocked.

What affects the cost of a commercial chain link fence

Legendary Fence Company High Point is direct about cost drivers so you can budget clearly. Several factors change the price of a commercial chain link fence, and understanding them helps you decide where to spend and where to save.

Fence length and height: Linear footage is the biggest cost factor. A long 6 foot perimeter fence may cost less per foot than a short, heavily featured 8 foot security fence, but total cost still tracks footage. Increasing height increases material and labor, especially once you go above 6 feet.

Grade and site conditions: Flat, open lots are faster and cheaper to fence than steep, wooded, or heavily paved sites. Working around existing structures, docks, retaining walls, or heavy traffic areas requires more layout and labor. Core drilling through asphalt or concrete is more expensive than digging in soil.

Material choices: Heavier gauge fabric, larger posts, vinyl coating, security arms, barbed wire, and privacy slats all add cost. We can price multiple options side by side, for example galvanized versus black vinyl coated, so you can see the cost difference clearly.

Gates and access: Gates are the most complex and cost-sensitive parts of a chain link fence. Single walk gates are inexpensive. Double drive gates for trucks, cantilever sliding gates, or gates that tie into card readers and operators cost more. In many High Point industrial yards, a single large operator-driven gate may represent a big portion of the total fence cost.

Removal and relocation: If you have an old fence to remove or if we must work around existing utilities, landscaping, or stored materials, labor time increases. Some clients choose to keep existing posts and upgrade the fabric and gates. We can evaluate whether that makes sense or if full replacement is more cost effective long term.

Why High Point businesses choose Legendary Fence Company High Point

There are plenty of companies that can stretch chain link fabric, but commercial projects demand more than basic installation. Legendary Fence Company High Point focuses on function, durability, and service life so you are not dealing with leaning posts, sagging fabric, or gates that never seem to latch right.

We build commercial chain link fences to be used hard, not just to look good on day one. That means correct post depth, proper concrete mix and bell shapes, tight and even fabric tension, heavy-duty hinges and latches, and thoughtful gate placement so trucks can swing and back up without constant adjustments. We also pay attention to details like bottom gaps so you do not end up with unauthorized foot traffic slipping under your fence.

Before we leave your property, we walk the fence line with you, demonstrate each gate and lock, and review any maintenance tips that apply to your specific setup, such as keeping operator tracks clean or trimming vegetation away from the fence line. If you expand, move a gate, or add privacy or security features later, we can modify your existing chain link system instead of starting from scratch.

If you are planning a new commercial chain link fence in High Point or upgrading an older one, Legendary Fence Company High Point can meet you on-site, map out real options, and provide a clear, itemized proposal so you can make a confident decision.